Alcon Replacement Front Brake Rotor & Bell 997.2 GT3 – 380x33mm
Alcon rotor and bell 380×33 mm replacement for Porsche cars with OE iron discs and comes with fitting kit which includes stainless steel bolts, bobbins and the caliper spacers to allow fitment.
Porsche 997.2 GT3 – 2009 to 2013
Alcon s grooves perform three basic functions:
- Increases initial friction between the rotors and pads, producing more “bite”
- Continuously refreshes the brake pad surface by removing debris from the pad
- Prevents build up of gas from the phenolics within the pads
Traditional slotted or drilled rotors include arrays of long, straight, or curved grooves staggered around the rotor s surface. Heat generated during braking leads to thermal distortion of the rotor, due to the incohesive friction rubbing produced by the grooves. This causes reduced pad contact and in some cases brake judder or shake. Alcon saw this, and with their breakthrough design they moved the grooves into short segments, thus continuous rotor contact area is maintained, helping to reduce thermal distortion and brake judder.
The curved form of each groove produces a longer edge than would otherwise be achieved if the grooves were straight. The grooves are also overlapped radially, which prevents grooving of the friction material and longer pad life. When compared with a blank rotor, Alcon s grooved rotor will produce greater pad wear and will also be noisier; but when compared with a cross-drilled rotor, initial bite will be similar without the thermal stress.
Please note: These are handed items, so be sure to select the required side when ordering.
*Images are for illustration purposes only and may differ from the actual product*